American white oak

American white oak is one of the most popular species from the U.S. hardwood forests in export markets – and is unique to North America.

Latin Name

Quercus species, mainly Q. alba

Other Common Names

northern white oak, southern white oak

American_white_oak_big
Compare species

White oak trees grow exclusively in North America and are widely distributed throughout most of the eastern United States in mixed hardwood forests. As with red oak there are many sub-species, all within the white oak classification, and together form the most common species group accounting for about 33% of the American hardwood resource. The trees are tall and easily identified by their rounded leaf form, turning brown in the fall. White oaks also grow from north to south; some high in the mountains and others on low land giving rise to different characteristics. Thus there are significant variations in white oaks depending on location, in particular between the slower grown northern and faster grown southern trees. As with red oaks, they are regarded as sustainable for both domestic andexport consumption.

FOREST GROWTH

FIA data shows U.S. white oak growing stock is 2.26 billion m3, 15.5% of total U.S. hardwood growing stock. American white oak is growing 40.1 million m3 per year while the harvest is 20.1 million m3 per year. The net volume (after harvest) is increasing 20.0 million m3 each year. U.S. white oak growth exceeds harvest in all major supplying states.

Alabama Arkansas Arizona California Colorado Connecticut District of Columbia Delaware Florida Georgia Iowa Idaho Illinois Indiana Kansas Kentucky Louisiana Massachusetts Maryland Maine Michigan Minnesota Missouri Mississippi Montana North Carolina North Dakota Nebraska New Hampshire New Jersey New Mexico Nevada New York Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Virginia Vermont Washington Wisconsin West Virginia Wyoming Volume of live trees on forest land, 1000 m³ 0 3.5K All data derives from The Forest Inventory and Analysis Database developed in 2001, a component of the U.S. Forest Service, Department of Agriculture.Data was compiled by AHEC in May 2020 using the most recent state inventory available (2018 for most states).“Forest volume” refers to “Net volume of live trees on forest land" as defined by FIA (see glossary). FIA forest volume data is available for 49 U.S. states (Hawaii and Washington D.C. are omitted) with total commercially significant hardwood forest volume of 14.6 billionWith the 2008 Farm Bill, every US State was tasked to prepare a Forest Action Plan by 2010, reviewed in 2015, to include comprehensiveassessment of forest condition and a strategy for sustainable forestry. Further details are available from theNational Association of State Foresters
Back to whole mainland U.S. 0-20K 20K-40K 40K-60K 60K-80K 80K-100K 100K-120K > 120K Volume of live trees on forest land, 1000 m³ 0 200K
-15K -10K -5K 0 5K 10K 15K 20K 25K GROWTH AND REMOVALS, 1000 m³ -10K -9K -8K -7K -6K -5K -4K -3K -2K -1K 0 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K GROWTH AND REMOVALS, 1000 m³ -2000 -1750 -1500 -1250 -1000 -750 -500 -250 0 250 500 750 1000 1250 1500 1750 2000 GROWTH AND REMOVALS, 1000 m³ -300 -200 -100 0 100 200 300 400 500 GROWTH AND REMOVALS, 1000 m³ Removals 0 Growth 0 Net growth 0
0 200K 400K 600K 800K 1M 1.2M FOREST VOLUME, 1000 m³ 0 40K 80K 120K 160K 200K 240K 280K 320K 360K 400K 440K FOREST VOLUME, 1000 m³ 0 10K 20K 30K 40K 50K 60K 70K 80K 100K FOREST VOLUME, 1000 m³ 0 4K 8K 12K 16K 20K FOREST VOLUME, 1000 m³ Forest volume 0

LCA Tool

0.89
seconds
it takes 1.57 seconds to grow 1m³ of American white oak
The replacement rate is calculated from total U.S. annual increment of the specified hardwood species derived from the U.S. Forest Service Inventory and Analysis (FIA) program and assumes that 2 m³ of logs is harvested to produce 1 m³ of lumber (i.e. 50% conversion efficiency). The rapid rate of replacement is due to the very large volume of hardwood trees in U.S. forest.
Compare species

White oak from the USA is readily available as sawn lumber and veneer, in a wide range of grades and sizes. Due to lengthy drying times not all suppliers offer thicker lumber stock (10/4" & 12/4") but it is available in limited volumes. In the north the sapwood tends to be less than in the south where, due to the shorter growing season, the wood is grown faster with more open grain and texture. White oak may be sold on the basis of 'northern' and 'southern', but this may be an over-simplification of the differences according to growing location. 

Compare species
  • White oaks have an attractive grain, similar to many other oaks grown globally. In general the sapwood of white oak is whitish to light brown and the heartwood is normally light to mid or even dark brown. The difference between the sapwood and heartwood of white oak is less distinct than in red oak. The wood of white oaks is mainly straight-grained with medium to coarse texture.
     
  • The wood is figured with medullary rays – a feature of all true (Quercus) oaks – and these in white oak are longer than those of red oak; thus producing a more pronounced figure. The heartwood wood is not porous, so is suitable for wine barrels and exterior use.

Mechanical Properties

American white oaks have excellent overall strength properties relative to weight, making them a preferred hardwood species for structural applications. The wood is hard and relatively heavy with good bending strength and compression strength but lower in stiffness. Structural testing carried out in Europe confirms that the white oak has greater inherent fibre strength than European oak. It has excellent steam bending capability. Being hard, stable when dry and easy to finish and stain, it is highly popular for furniture and flooring, especially in export markets. 

To find out more about the mechanical properties of white oak read the full structural guide.

  • 0.68

    Specific Gravity (12% M.C.)

    769 kg/m3

    Average Weight (12% M.C.)

    12,273 MPa

    Average Volume Shrinkage (Green to 6% M.C.)

    104.804 MPa

    Modulus of Rupture

    12,273 MPa

    Modulus of Elasticity

    51.299 MPa

    Compressive strength (parallel to grain)

    6,049 N

    Hardness
Compare species
Oiled
oak_white_oiled
Un-oiled
oak_white_unoiled
Compare species
  • White oak lumber machines well, with good performance in nailing and screwing, although pre-boring is recommended. It glues well (although the inclusion of primers are recommended for structural gluing) and can be stained and polished to a very good finish. The wood has to be dried slowly and carefully to avoid degrade and it has high differential radial and tangential shrinkage so can be susceptible to movement in performance in humid conditions. It has excellent drilling and finishing properties.
     
  • The heartwood is resistant to decay and resistant to preservative treatment.
Compare species

This sustainably managed wood from natural forests of North America, with excellent environmental credentials, is a key species in many export markets. Its main uses are in furniture, flooring, doors, architectural joinery and mouldings and kitchen cabinets. It is also used in certain applications for construction, including structural glue-laminated beams, and other specialist applications.

Mouldings
Flooring
Furniture
Doors
Cabinets
Glulam Beams

Examples of Use

Albert Road by Stephen Jolson
Chapel of St Albert the Great by Simpson & Brown Architects
Church Crescent by Evonort Architects
Huesca Palace of Congress by Beneytez and Lafuente
Mechlelen Museum by Driesen and Le Compte
Milan expo flooring by James Biber
Narin Chair by David Irwin and Case Furniture
The Living Staircase by Paul Cocksedge Studio
Lord’s Warner Stand by Populous Architects