American tulipwood

Commercially American tulipwood is one of the most prolific hardwood species from the U.S. hardwood forests and is unique to North America, having been eliminated in Europe by the last ice age.

Latin Name

Liriodendron tulipifera

Other Common Names

yellow poplar, tulip poplar, canary whitewood; not to be confused with European or Chinese poplar

American_tulipwood_big
Compare species

Tulipwood trees grow exclusively in North America and are widely distributed throughout most of the eastern United States in mixed hardwood forests.  It is a single species and is not a poplar (Populus) being a Magnoliacae producing wood that is superior to the many poplar species. The trees are huge and identified by their tulip-like flowers giving rise to the name. Tulipwood grows from north to south and is one of the most sustainable hardwoods in the USA.

FOREST GROWTH

FIA data shows U.S. tulipwood growing stock is 1.12 billion m3, 7.7% of total U.S. hardwood growing stock. American tulipwood is growing 34.6 million m3 per year while the harvest is 12.8 million m3 per year. The net volume (after harvest) is increasing 21.8 million m3 each year. U.S. tulipwood growth exceeds harvest in all states.

Alabama Arkansas Arizona California Colorado Connecticut District of Columbia Delaware Florida Georgia Iowa Idaho Illinois Indiana Kansas Kentucky Louisiana Massachusetts Maryland Maine Michigan Minnesota Missouri Mississippi Montana North Carolina North Dakota Nebraska New Hampshire New Jersey New Mexico Nevada New York Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Virginia Vermont Washington Wisconsin West Virginia Wyoming Average annual growth, m3 0 3.5K
0-20K 20K-40K 40K-60K 60K-80K 80K-100K 100K-120K > 120K Average annual growth, m3 0 200K
-15K -10K -5K 0 5K 10K 15K 20K 25K GROWTH AND REMOVALS, 1000 m³ -10K -9K -8K -7K -6K -5K -4K -3K -2K -1K 0 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K GROWTH AND REMOVALS, 1000 m³ -2000 -1750 -1500 -1250 -1000 -750 -500 -250 0 250 500 750 1000 1250 1500 1750 2000 GROWTH AND REMOVALS, 1000 m³ -300 -200 -100 0 100 200 300 400 500 GROWTH AND REMOVALS, 1000 m³ Removals 0 Growth 0 Net growth 0
0 200K 400K 600K 800K 1M 1.2M FOREST VOLUME, 1000 m³ 0 40K 80K 120K 160K 200K 240K 280K 320K 360K 400K 440K FOREST VOLUME, 1000 m³ 0 10K 20K 30K 40K 50K 60K 70K 80K 100K FOREST VOLUME, 1000 m³ 0 4K 8K 12K 16K 20K FOREST VOLUME, 1000 m³ Forest volume 0

LCA Tool

1.48
seconds
it takes 1.82 seconds to grow 1m³ of American tulipwood
The replacement rate is calculated from total U.S. annual increment of the specified hardwood species derived from the U.S. Forest Service Inventory and Analysis (FIA) program and assumes that 2m³ of logs is harvested to produce 1m³ of lumber (i.e. 50% conversion efficiency). The rapid rate of replacement is due to the very large volume of hardwood trees in U.S. forest.
Compare species

Tulipwood from the USA is readily available as sawn lumber in a wide range of grades and thicknesses (4/4” through to 16/4”) due to its ease of drying. A relative knot free timber average lumber widths and lengths can be higher than other commercial species. Tulipwood is used in plywood production but with more limited availability as decorative veneer. The sapwood produces the often preferred whiter wood, as the heartwood usually exhibits strong colour variation. However the use of unsorted tulipwood displaying all its natural colour variation is on the increase, especially in Europe. Tulipwood is sold domestically, and sometimes referred to in export, as ‘poplar’ but should not be confused with European or Chinese poplar. 

Compare species

Tulipwood has less strong grain characteristic than species such as ash and oak, and is more like maple in character but darker in colour. However, there is a marked difference between the sapwood and heartwood of tulipwood. The sapwood is creamy white whereas the heartwood can vary from pale yellow or brown and even green to purple in extreme cases. The wood darkens with time on exposure to UV light and the green colour will turn brown. The wood of tulipwood is straight-grained with a medium to fine texture.

Mechanical Properties

Tulipwood has extraordinary overall strength properties relative to weight, making it highly suitable for structural applications, such as glue-laminated beams and cross laminated timber (CLT). The wood has relative low density, with high bending, shock resistance, and stiffness values, but is lower in compression and hardness. The wood has medium steam-bending capability and is extremely stable when fully dry and not installed in humid conditions. It is easy to finish and stain, so is highly suitable for furniture and joinery.

To find out more about the mechanical properties of tulipwood read the full structural guide.

  • 0.42

    Specific Gravity (12% M.C.)

    449 kg/m3

    Average Weight (12% M.C.)

    9.80%

    Average Volume Shrinkage (Green to 6% M.C.)

    69.640 MPa

    Modulus of Rupture

    10,894 MPa

    Modulus of Elasticity

    38.198 MPa

    Compressive strength (parallel to grain)

    2,402 N

    Hardness
Compare species
Oiled
American_tulipwood_oiled
Un-oiled
American_tulipwood_unoiled
Compare species
  • Tulipwood lumber is easy to machine, plane, turn and glue with good performance screwing, although pre-boring is recommended. It tends to split when nailed. Tulipwood can easily be stained and polished to a very good finish. The wood can be susceptible to movement in performance in humid conditions.
     
  • The wood is non-resistant to decay. The heartwood can be resistant to preservative treatment, whereas the sap is permeable. Overall, tulipwood can be considered for preservation with modern preservation treatment methods including thermal modification, to which it is particular suited.
Compare species

This sustainably managed wood from natural forests of North America, with excellent environmental credentials, is a key species in many export markets. Its main uses are in furniture, doors, panelling, architectural interior joinery and mouldings and kitchen cabinets. It is also used in certain applications for construction and in some specialist applications such as carving.

Mouldings
Carving
Furniture
Doors
Panelling
Cabinets
Glulam Beams
CLT